Once the engine and transmission are out, the subframe could be unbolted in four location from the body – 2 under the front seat pans and 2 directly under the firewall/bulkhead. These were very rusty so a big cheat bar on the socket wrench was used, and probably a whole can (not really…) of WD-40. The bushings are completely shot, there’s almost nothing left of them, they’ve rusted and disintegrated…
Archive:
Body
Doors off and a couple windows out.
Took both doors off. Took rear window and one rear quarter window out. The rubber seal for the back window had almost completely disintegrated so the glass just lifted out. One quarter window was seperated from its tracks (a plastic roller has fallen off) so this was also simple – the other side is still connected to the guide tracks, so I’ll leave it for now.
Don’t do this to…