Got round to finishing the sound deadening.
I used a layer of foil backed butyl (dynamat or dodo mat) on the painted metal to reduce vibrations…
… and then a layer of foam on top of that to reduce sound…
-
- The underlay is laid, the wires are the part of the loom serving the rear of the car
… on top of this the carpet can be laid…
-
- Here the carpet is laid inside the car and the moulded areas aligned to the car as best as possible. Looking pretty good. Now it’s a case of slowly trimming the edges and installing the carpet underneath the kick panels, the firewall pad and the door sill plates.
… I still need to trim the edges to install it properly, secured under the kick panels, firewall pad and scuff panels.
No comments yet.