The latest batch of parts to be painted. Sadly not the last.
1 – Marine Clean applied by spray bottle. 2 – Jet blast Marine Clean off. 3 – After degreasing.
Forgot about the axle, so time to degrease that.
Nice picture showing the colour of the degreasant being blasted off, obviously works.
Drying after being degreased.
Time to pre-prime with Metal Ready. Again applied by spray bottle.
After Metal Ready application. It leaves a zinc coating (white) on the metal. This is apparently the best surface key for POR-15 paint to adhere to.
No comments yet.