(Removing bushing sleeves from lower control arm.) Didn’t know for certain that the new lower control arm bushings would include the outer metal sleeves. But they do:
So, had to remove all of the ones I left in previously, in case I didn’t get new ones.
Simply used a chisel, hammer and brute force…
… and lots of WD40…
… to eventually get them all out.
Then used an angle grinder to smooth any burring out.
Then just repeat 3 more times for each bushing. Will probably now have to strip the control arms and repaint (the sides not photographed are a lot more ugly)… oh well.
See my replacing bushings how-to article here.