I upgraded the rear seat belts to a 3-point harness. I used a kit from Morris Classic. Like the front belts the install was straight forward, though here a couple holes were required to be drilled through the rear deck (parcel shelf). With the shelf, speakers and belts now in place the next thing on the interior to-do list will be to get the rear bench seat and surrounding panels in.
- One half (one side) of the kit from Morris
- The rear bracket mounted to the underside of the parcel shelf. The bolt above the wheel well goes through an existing slot. There are two hole that need to be drilled through the parcel shelf, one just goes through the metal (the small one at the back) and the other large one goes through the shelf board material on top and is what secures the belt holder)
- The passenger side
- Both belt reels in place
- The bottom of the belts re use the original two lap belt mounting locations
- Both sides finished